Car Wheel Repair Kit

Car Wheel Repair Kit is a SET that INSTANTLY FIXES the CURB, DAMAGE, SCRATCHES, SLIGHT DENTS, and SANDING MARKS of your CAR STEEL RIMS. It GIVES you a PROFESSIONAL RESULT without the NEED of EXTRA TOOLS and REPAIR SHOPS.

Car Wheel Repair Kit can UTILIZE paint that PERFECTLY matches the paint on most ALLOY WHEELS for a FLAWLESS and INVISIBLE job. Its PROPER REPAIRS are ABLE to WITHSTAND car washes and it is RESISTANT to BOTH VIBRATION and HEAT up to 266°F. It works for ALLOY WHEELS or STEEL WHEELS and also can be used for HUBCAPS. 

Car Wheel Repair Kit is EASY to USE. Just follow these simple steps:

1. Clean the damaged alloy wheel and remove rough edges and unevenness around the damaged area.

2. If damaged area is small, rub wet sandpaper on the damaged surface, then apply Lacquer to repair the area.

3. If damaged area is big or contain holes, use the repair adhesive. Press out the needed mass of repair adhesive to a mat. Mix both components to a consistent grey mass with spatula provided for around 2-4 minutes.

4. Fill the damaged area with the mixed mass and allow it to dry for 15 minutes.

5. Rub wet sandpaper on the repaired surface. If necessary, please repeat step 3 again.

6. Clean the repaired area and apply a thin layer of lacquer by brush. Lacquer should dry at least 1-2 hours before using the car and full cure time is 3 days.

• 1 x Repair Glue (6ml)
• 1 x Silver Gray Paint (5ml)
• 1 × Sanding File
• 2 x Gloves
• 2 x Cotton Swabs
• 2 x Paint Brush
• 2 x Alcohol Prep Pads
• 2 x Plastic Spatula
• 1 x Instruction Manual